Filter
Top Products
Before using
14
LSQT0974
(37) Shoulder strap fixture
This is a fixture for attaching the shoulder strap to
hang the Camcorder from your neck or shoulder.
≥Put the strap through the fixture 1 and through
the stopper 2 so it will not come off. Extend
part 3 by at least 2 cm (1 inch).
≥Fit the other end of the belt similarly.
(38) Lens hood
In order to remove the lens hood, rotate it
counter-clockwise 1. In order to fit it, place into
slot 2, and then rotate it clockwise.
≥The lens hood has a built-in lens cover.
The one-touch free-style grip belt
ª To use as a grip belt
Adjust the belt length so it fits your hand.
1 Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
ª
To use as a hand strap
If you use the grip belt as a hand strap, then you
can carry or handle this Camcorder more easily.
1 Flip the belt.
1 Flip the belt.
2 Adjust the length.
2 Put your hand through the strap.
≥Hold the Camcorder without covering the
microphones or sensors with your hands.
(37)
3
2
1
1
2
(38)
1
3
2
1
2
LSQT0974_ENG.book 14 ページ ２００５年１１月７日 月曜日 午前１１時５８分