Panasonic PV-GS300 Camcorder User Manual


 
Record mode
38
LSQT0974
Wide/4:3 function
This allows you to record images compatible with
wide-screen TVs.
Wide Function
Images are recorded with a 16:9 aspect ratio.
4:3 Function
Images are recorded with a 4:3 aspect ratio.
Set to Tape/Card Recording Mode.
1 Wide Function
Set [BASIC] >> [ASPECT] >> [16:9].
4:3 Function
Set [BASIC] >> [ASPECT] >> [4:3].
ª
To Cancel the Wide/4:3 Function
Wide Function
Set [BASIC] >> [ASPECT] >> [4:3].
4:3 Function
Set [BASIC] >> [ASPECT] >> [16:9].
The default setting is [16:9].
In the wide-screen mode, the menu screens,
operation icons and other screen displays
appear horizontally oriented.
When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
Depending on the TV, the picture quality may
deteriorate.
If still pictures recorded with a 4:3 aspect ratio
are played back when [TV ASPECT] is set to
[16:9], part of the operation icons and other
displays will appear on the black bands on the
left and right of the picture.
Concerning the TV to be connected and TV
used for playback
When playing back images taken by this unit
on a TV screen, change the setting
established by Tape/Card playback mode
[SETUP] >> [TV ASPECT] to match the
aspect ratio (4:3 or 16:9) of the TV monitor to
be connected. (
-45-)
Depending on the settings of the TV
connected, the images may not be displayed
properly. For more information, please read
the operating instructions for the TV.
Optical image stabilizer function
On this model, [O.I.S.] is used as the indication
for Optical Image Stabilizer.
Reduces the jitter caused by hand movement
when recording.
Set to Tape/Card Recording Mode.
1 Set [ADVANCED] >> [O.I.S.] >> [ON].
ª
To cancel the image stabilizer function
Set [ADVANCED] >> [O.I.S.] >> [OFF].
When recording still pictures in the Card
Recording mode, pressing the [PHOTO SHOT]
button halfway increases the effect of the image
stabilizer function. (MEGA Optical Image
Stabilizer)
When a tripod is used, we recommend that you
turn the image stabilizer off.
In the following cases, the image stabilizer
function may not work effectively.
When the digital zoom is used
When the Camcorder is shaken greatly
When you record a moving subject while
tracking it
O.I.S.
LSQT0974_ENG.book 38 ページ 2005年11月7日 月曜日 午前11時58分