Filter
Top Products
Others
68
LSQT0974
PUSH THE RESET SWITCH:
An irregularity in the equipment has been
detected. Press the [RESET] button (
-13-).
This may solve the problem.
CHANGE MODE TO USE USB:
The USB cable is connected to the
Camcorder in Card Recording Mode.
DISCONNECT USB CABLE:
You are attempting to turn the mode dial in
PC Connection Mode with the USB cable
connected to the Camcorder. You are
attempting to record pictures on a tape/card
with the USB cable connected to the
Camcorder.
NO INK IN PRINTER:
There is no ink. Check the connected
printer.
NO PAPER IN PRINTER:
There is no paper. Check the connected
printer.
PRINTER ERROR:
Check the connected printer.
PC DOES NOT SUPPORT USB2.0:
The Camcorder is connected to a personal
computer that does not support USB 2.0.
(Refer to the operating instructions for PC
connection.)
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM]
setting during MotionDV Mode.
REVERSE THE LCD MONITOR:
At the time of 0 Lux MagicPix mode, when
LCD monitor is not reversed, it displays.
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
Functions cannot be used
simultaneously
Some functions in the Camcorder are disabled or
cannot be selected due to its specifications. The
table below shows examples of functions
restricted by conditions.
Functions Conditions which disable
the functions
≥Digital zoom
≥Fade
≥When the Card Recording
mode is used
≥Backlight
compensation
≥When the MagicPix
function is used
≥When the iris/gain is set
≥Help mode
≥Recording
check
≥Blank search
≥Soft skin
≥Tele macro
≥While recording to a tape
≥MagicPix ≥While recording to a tape
≥When the Card Recording
mode is used
≥RapidFire
Consecutive
Photoshot
≥When [PICTURE SIZE] is
set to other than or
≥Flash ≥While recording to a tape
≥During demo mode
≥When RapidFire
Consecutive Photoshot is
used
≥When the MagicPix
function is used
≥Zoom
microphone
≥Wind noise
reduction
≥An external microphone is
used
≥Scene mode ≥When setting the [AUTO/
MANUAL/FOCUS] switch
to [AUTO]
≥When the MagicPix
function is used
≥Change of
white balance
≥When digital zoom (10k
or higher) is used
≥When the MagicPix
function is used
≥Adjusting the
shutter speed,
iris/gain
≥When the MagicPix
function is used
≥When the scene mode is
used
0.2
0.3
M
LSQT0974_ENG.book 68 ページ ２００５年１１月７日 月曜日 午前１１時５８分