With a PC
57
LSQT0974
RAM:
256 MB or more
(Adding more memory enables you to operate the
personal computer more comfortably.)
Hard disk:
Ultra DMA – 33 or more
Free hard disk space:
640 MB or more
(When you capture video, 1 GB is needed for
data of approx. 4 minutes.)
Interface:
DV (IEEE1394) terminal (IEEE1394.a)
USB 2.0 — A type (Hi-Speed compliant)
DirectX 9.0b/9.0c
Windows Media Player 6.4 to 10
Other requirements:
Mouse
ª
Installing USB Driver
Install this when your OS is Windows 2000 SP4.
(When your OS is Windows XP SP2, installing
USB driver is not needed.) USB Driver must be
installed when you connect the Camcorder to the
PC with the USB cable and use Quick Movie
Magic or MotionDV STUDIO.
DirectX 9.0b is installed in your PC if it is not
installed beforehand.
≥When DirectX 9.0b is installed, applications
supported by previous versions of DirectX may
not run. In this case, consult the manufacturers
of the applications disabled.
1 Insert the supplied CD-ROM into the
personal computer’s CD-ROM drive.
≥Quit all applications.
≥[Setup Menu] appears.
2 Click [USB Driver].
≥The set up program starts running.
3 Depending on your system environment,
installation of “DirectX 9.0b” may be
required. Click [Yes] and continue with
installation.
≥After “DirectX 9.0b” is installed, the computer
will restart.
≥Do not remove the CD-ROM.
≥Installation may take a little while.
4 Finish installation by following the
on-screen instructions.
≥Click [Next] and proceed with installation.
≥After completing the installation, Click
[Finish].
5 Click [OK].
ª
Installation of Quick Movie Magic/
MotionDV STUDIO
1
Insert the supplied CD-ROM into the
personal computer’s CD-ROM drive.
≥Quit all applications.
≥[Setup Menu] appears.
2 Click the [Quick Movie Magic]/
[MotionDV STUDIO].
3 Click [Next].
≥After reading the displayed contents, please
carry out the installation according to
instructions.
4 Select the Video system.
5 After the completion of setup, click on
[Finish].
≥Sample data is installed concurrently with the
Quick Movie Magic/MotionDV STUDIO
software.
6 Click [Finish].
LSQT0974_ENG.book 57 ページ 2005年11月7日 月曜日 午前11時58分