Panasonic PV-DV52 Camcorder User Manual


 
16
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
The LCD (Liquid Crystal Display) monitor
can be used while recording.
1Press LCD-OPEN to unlock the LCD
monitor.
2 Swing the LCD monitor fully open
and adjust the viewing angle.
The LCD monitor will automatically
turn on.
When the LCD monitor is completely
closed, it will shut off automatically to
save power.
Adjust the LCD Brightness and/or
color of the LCD monitor if necessary.
Please refer to To adjust the LCD/
EVF BRIGHTNESS or COLOR
below.
3 Start recording.
Using the LCD monitor will reduce battery
operating time.
Close the LCD monitor completely when
not in use.
Using the LCD Monitor
1LCD-OPEN
Note
180°
90°
90°
Camera Recording
To adjust the LCD/EVF
BRIGHTNESS or COLOR
1Press MENU to display the main menu
screen.
2 Rotate JOG KEY to select LCD/EVF
SETTING from the main menu screen.
(Menu OSD: pp. 60, 62)
3 Press JOG KEY to display the LCD/
EVF SETTING screen.
4 Press JOG KEY to select LCD
BRIGHTNESS, LCD COLOR, or
EVF BRIGHTNESS, then rotate JOG
KEY to adjust.
5 Press MENU twice to exit this mode.
1, 5
MENU
2, 3, 4
JOG KEY
EVF/LCD
DV52.p15-19.p65 02/05/28, 10:3616