Filter
Top Products
8
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Before Using
1 Hold down LIGHT for more than 0.7
seconds to turn ON or OFF.
•“
” will appear on the screen.
To brighten the natural colors in a scene.
Using the Built-in Light
Caution
This light becomes hot during operation.
Make sure nothing covers the light during
operation.
• Using Light reduces battery time.
• Provide adequate ventilation if using
Light in a hot environment for a long time.
• Set LIGHT to OFF when not in use.
• When replacing the bulb, see page 48.
Built-in Light
Note
Before you begin
• Connect the Palmcorder to a power
source. (pp. 11, 12)
• Set POWER to CAMERA.
1LIGHT
Attaching the Lens Cap Cord to the Hand
Strap:
Remove the Hand Strap from the front
clasp and thread the Strap through the loop
in the Lens Cap Cord.
Reattach the Hand Strap.
Lens Cap
Attaching the Lens Cap Strap:
Thread the Lens Cap Strap through the
Strap Attachment Ring as shown.
1
2
3
Adjust the length of the Hand Strap to the
size of your hand as illustrated.
Hand Strap
Hand Strap
DV52.p 5-8.p65 02/05/28, 10:358