Panasonic PV-DV52 Camcorder User Manual


 
44
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Running the Software
PHOTOVU LINK:
You can transfer images from your
Palmcorder tape to your PC.
1 Turn your PC (Personal Computer) on
and start up Windows.
2 Insert PHOTOVU LINK DRIVER Disk
(Optional) into a floppy disk drive.
3 Click on Start, then Run
4 Type in a:\setup.exe and click OK.
If your 3.5 inch floppy disk drive is not
A, use the appropriate letter.
5 Follow the instructions as they appear
on the PC screen until the installation
is complete.
Setup window will disappear when
the installation is complete.
1Click on Start, Programs,
Panasonic, Palmcorder, then
PHOTOVU LINK.
2PHOTOVU LINK is opened.
COM Port and Baudrate are automatically
selected.
Refer to Help for information about
application operations and other Error
messages.
Note
Before you begin
Insert the Tape. (p. 9)
Make Palmcorder-PC connections.
(p. 43)
Turn your PC on.
Set Palmcorder POWER to VCR.
PHOTOVU LINK
DV52.p42-45.p65 02/05/28, 10:3744