7
Before Use
1 Undo the two strap ends from their
buckles.
2 Thread the strap ends through the
Strap Attachment Rings.
3 Reinsert the strap ends through their
buckles.
• Make sure the straps are not twisted.
Before Using
1 Press LCD-OPEN to unlock the LCD
monitor, and swing it fully open.
2 Slide TAPE EJECT to open the
Cassette Compartment Cover.
3 Insert a cassette record tab up,
window side facing out.
4 Press PUSH CLOSE to close the
Cassette Compartment Cover.
Note
• When inserting the cassette, make sure it is facing the right direction and then push
it in completely.
Easy Cassette Eject/Insertion
• If the Palmcorder is connected to a power
source, the cassette can be inserted and
ejected without turning the Palmcorder
on.
• To remove the cassette...
Slide TAPE EJECT to open the Cassette
Compartment Cover and pull the cassette
tape straight out.
1LCD-OPEN
Cassette Compartment
Cover
2TAPE EJECT
4PUSH
CLOSE
Before you begin
• Connect the Palmcorder to a power
source. (pp. 11, 12)
Attaching the Shoulder Strap
2
1
3
OR
1 Loosen the strap from the Buckle and
create a loop.
2 Pull the strap firmly through the
Buckle to shorten or lengthen the
strap.
1
Adjust the Length
DV52.p 5-8.p65 02/05/28, 10:357