Filter
Top Products
38
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Editing Features
The original sound can be replaced with
new sound using the built-in Palmcorder
microphone.
Audio Dubbing using the
Built-in Microphone
1 Set POWER to VCR.
2 Press (PLAY). Then press
(PAUSE) where you want dubbing to
begin.
3 Press MENU to display the VCR mode
menu screen.
4 Rotate JOG KEY to select REC MODE ,
then press JOG KEY to display the
VCR REC MODE menu screen.
5 Rotate JOG KEY to select AUDIO-
DUB , and then press JOG KEY to
select ON.
• The Palmcorder will go to Stand By
mode, and “A.DUB
” indication
appears in the EVF or the LCD
monitor.
2PLAY
2PAUSE
Before you begin
• Turn on the Palmcorder.
• Insert a pre-recorded tape to be
dubbed.
Built-in Microphone
The AUDIO-REC setting in CAMERA
MENU mode should be as follows:
• Select 12 bit if you do not want the
original sound to be completely replaced
during an audio dub.
• If you dub over a tape which has both
12 bit and 16 bit audio recordings on it,
keep in mind that the original 16 bit audio
portion will be completely replaced.
12 bit
16 bit
The original sound is recorded
on ST (Stereo) 1, and the new
sound will be recorded on ST
(Stereo) 2.
The original sound is replaced
with the new sound.
1POWER
4, 5
JOG KEY
3MENU
DV52.p38-41.p65 02/05/28, 10:3738