Filter
Top Products
13VQT1M21
OPEN
6
Open the terminal cover.
7
Plug the DC plug into the
DC input terminal on the
unit.
1
Set the mode dial to
a position other than
[OFF].
2
Select [YES].
3
Set the date and time.
To select settings To change
numerical values
4
Enter the date and time.
• This procedure is for setting the
date and the time the very first
time. For the setting procedure for
the second and subsequent times
(P.30).
Status indicator
Flashing red: Charging in
progress
Off: Charging complete
Setting the date and time
Slide the lock to the OPEN side
and lift the projection with a finger
to open.
Projection