Filter
Top Products
6 VQT1M21
PRECAUTIONS
USE & LOCATION
WARNING
● TO AVOID SHOCK HAZARD…
Accessories (AC adaptor, AC cable, battery pack, SD memory card and etc.)
should not be exposed to rain or moisture. Do not connect the power supply
if it gets wet. Your camera has been designed for outdoor use, however
accessories are not designed to sustain direct exposure to water, rain, sleet,
snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
This action could permanently damage the internal parts. Do not attempt to
disassemble this unit. There are no user serviceable parts inside. Unplug your
camera from the power supply before cleaning.
CAUTION
● DO NOT AIM YOUR CAMERA AT THE SUN OR OTHER BRIGHT OBJECTS
● DO NOT EXPOSE YOUR CAMERA TO EXTENDED HIGH
TEMPERATURE…
Such as, in direct sunlight, inside a closed car, next to a heater, etc... This
action could permanently damage the internal parts of your camera.
● AVOID SUDDEN CHANGES IN TEMPERATURE…
If the unit is suddenly moved from a cold place to a warm place, moisture may
form on the SD card and inside the unit.
● DO NOT LEAVE YOUR CAMERA OR THE POWER SUPPLY TURNED ON
WHEN NOT IN USE.
● STORAGE OF YOUR CAMERA…
Store and handle your camera in a manner that will not subject it to
unnecessary movement (avoid shaking and striking). Your camera contains
a sensitive pick-up device which could be damaged by improper handling or
storage.
CARE
● TO CLEAN YOUR CAMERA…
Do not use strong or abrasive detergents when cleaning your camera body.
● TO PROTECT THE LENS…
Do not touch the surface of the lens with your hand. Use a commercial
camera lens solution and lens paper when cleaning the lens. Improper
cleaning can scratch the lens coating.
● TO PROTECT THE FINISH OF YOUR CAMERA…
Before handling your camera, make sure your hands and face are free from
any chemical products, such as suntan lotion, as it may damage the finish.
Camera and SD card (sold separately) temperature
After use and battery charging, the battery will be hot. Also, during use,
although the unit’s body and SD card become hot, there is nothing wrong with
the unit.