Filter
Top Products
62 VQT1M21
Connect the unit and AC adaptor (P.22), and set the mode dial to a setting
other than [OFF].
Connect the unit and printer with the USB cable (supplied).
Insert the plugs as far as they will go.
Select [PictBridge].
Select the still pictures to print.
Number of
copies (Max. 9)
Set the number of copies.
• To not print the picture, set “0”.
• Repeat steps
and to select up to 8 still
pictures for printing.
● Do not use any other USB connection cables except the supplied one.
(Operation is not guaranteed with any other USB cables.)
● Connect the unit directly to the printer without going through a USB hub.
● For paper size and print quality, etc., check printer settings.
● Avoid the following operations during printing. Otherwise, pictures will not print
correctly:
• Disconnecting the USB cable
• Opening the card/battery door
• Rotating the mode dial
• Shutting off power
With other
products
3
Printing pictures from
PictBridge printers