Filter
Top Products
58
LSQT1190
Recording
will temporarily be black. (The black balance
cannot be adjusted manually.)
1 Black balance adjustment in progress.
(Flashes.)
2 White balance adjustment in progress.
(Flashes.)
3 Adjustment completed. (Lights up.)
≥ (SDR-H200) When the unit is turned on with
the lens cover closed, the automatic white
balance adjustment may not function properly.
Please turn the unit on after opening the lens
cover.
≥ (SDR-H20/SDR-H18) When the unit is turned
on with the lens cap attached, the automatic
white balance adjustment may not function
properly. Please turn the unit on after removing
the lens cap.
≥ When the [ ] display flashes, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set
the white balance for correct adjustment.
≥ When setting both the white balance and the
iris/gain, set the white balance first.
[HDD] [SD]
Shutter Speed:
Adjust it when recording fast-moving subjects.
Aperture:
Adjust it when the screen is too bright or too
dark.
¬Rotate the mode dial to select or
.
1 Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2 Move the joystick left or right to
select [ ] (aperture) or [ ]
(shutter speed).
3 Move the joystick left or right to
make the adjustment.
A Shutter speed:
1/60 to 1/8000
1/30 to 1/2000 (SDR-H200)
1/60 to 1/500 (SDR-H20/SDR-H18)
≥ The shutter speed closer to 1/8000 is
faster.
B Iris/Gain value:
CLOSE # (F16 to F2.0) # OPEN # (0dB
to 18dB)
≥ Value closer to [CLOSE] darken the image.
≥ Value closer to [18dB] brighten the image.
≥ When the iris value is adjusted to brighter
than [OPEN], it changes to the gain value.
To restore to automatic adjustment
Set the AUTO/MANUAL/FOCUS switch to
AUTO.
Manual shutter speed/
aperture adjustment
123
MNL
3/3
3/3
NEXT
NEXT
3/3
NEXT
MNL
3/3
3/3
NEXT
NEXT
3/3
NEXT
OPEN
OPEN
1/
100
100
1/100
OPEN
MNL
BACK
BACK
BACK
A
B
LSQT1190(ENG).book 58 ページ ２００７年１月１３日 土曜日 午後３時３２分