Filter
Top Products
97
LSQT1190
With a computer
Connection and
recognition (Macintosh)
After the software is installed, the unit must be
connected to the computer and be correctly
recognized by the computer.
≥ Connect after installing the software.
≥ If the supplied CD-ROM is inserted in the
computer, remove it. (If the installer setup is
running, wait until it finishes, then remove the
CD-ROM.)
≥ If the recognition procedure is not
accomplished properly, operation will not be
possible after connecting the unit to the
computer.
≥ If the unit fails to operate normally, it may mean
that you have not conducted the installation or
recognition procedure properly.
¬Connect this unit to the AC adaptor
and turn on the unit.
1 Connect this unit and a
computer.
A USB cable (supplied)
≥ Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
The USB function selection screen will appear.
2 Select [PC CONNECT] # [HDD]
or [SD CARD] and press the
joystick.
This unit is automatically recognized by the
computer.
≥ When the unit is connected to a computer,
its power cannot be turned off.
In this case, disconnect the USB cable (l 98).
≥ When a computer is accessing the HDD or
card in this unit, the ACCESS/PC lamp or card
access lamp lights. ( or appears on
the LCD monitor.) Do not disconnect the USB
cable or AC adaptor while the HDD or card is
being accessed as it may damage the data.
≥ The HDD and card cannot be accessed
simultaneously.
When the unit is connected to a computer, it is
recognized as an external drive.
≥ This unit supports only the readout of data
using the computer. The computer cannot write
data to the unit, or erase data from the unit.
≥ Depending on the operating environment of the
computer, the shape of the drive icon and the
drive name will differ.
∫ Drive icons
HDD
SD card
Connection and recognition
procedures
A
About the computer display
LSQT1190(ENG).book 97 ページ ２００７年１月１３日 土曜日 午後３時３２分