Filter
Top Products
15
Turning the Power On
Select a desired mode from the mode selection screen
on the LCD Monitor.
1 Press the [Í] Button for 1 second or
more.
≥The SD Video Camera is turned on and the
Power/Card Access Lamp A is lit in red.
ª Auto power on mode
If you set the [Auto power on] to [On] in [Setup] on
[MENU], the SD Video Camera is automatically turned
on when LCD Monitor is opened.
≥When the battery is removed, the setting on the [Auto
power on] is turned to [Off]. (The setting on the [Auto
power on] may be turned to [Off] when the battery
power is drained. Please recharge the battery for this
feature to function.)
ª Turning the power off
1 Press the [Í] Button for 2 seconds or
more.
≥The SD Video Camera is turned off and the
Power/Card Access Lamp A is goes off.
≥When the LCD monitor is closed, the picture on
the LCD monitor disappears. However, the SD
Video Camera is not turned off.
≥When you do not operate the SD Video Camera for
about 5 or more minutes, the SD Video Camera is
automatically turned off. (Using the AC Adaptor,
when both the card and the battery are not inserted,
the SD Video Camera is not turned off automatically.)
A
1
AV50PP_ENG.book 15 ページ ２００３年１１月２６日 水曜日 午後３時１７分