Panasonic SV-AV50 Camcorder User Manual


 
67
Playback
1: Recorded still pictures are not clear.
1: Is [Quality] on the menu set to
[Normal]? If recording is done with it
set to [Normal], images with fine details
may include a mosaic-like pattern. Set
[Quality] to [Fine].
2: Playback images do not look
normal.
2: The picture may be damaged. In order
to prevent the loss of image data,
backing up on a personal computer is
recommended.
3: Actual recording time/still image
storage capacity in the Memory
Card is different from those
described in these Operating
Instructions drastically.
3-1: Actual recording time/still image
storage capacity depends on the kind
of the image.
3-2: When MPEG4 moving picture data, still
picture data, sound data, and audio
data are recorded in the Memory Card,
less capacity in the Memory Card can
be used.
4: While playing back a Voice file or a
Music file, the LCD Monitor is
suddenly turned off.
4-1: The LCD Monitor is automatically
turned off approx. 5 seconds after
starting playing back or recording a
Voice file. Open and Close the LCD
Monitor turns on the LCD Monitor.
However, in the case of not conducting
any operation for approx. 5 seconds,
the LCD Monitor is turned off again.
(The LCD Monitor is on while stopping
playback (or pausing).)
4-2: When the [Power save] mode is set to
[On], the LCD Monitor is turned off
5 seconds after starting playback of a
Music file.
5: An [k] Indication or a black screen
is displayed.
5-1: The [k] Indication appears when the
data is damaged and cannot be played
back.
5-2: The screen turns black when you tried
to play back the data with the format
which is not compatible with the SD
Video Camera.
6: Even if a Memory Card is formatted,
it cannot be used.
6: Either the SD Video Camera or the
Memory Card may be damaged.
Please consult your Panasonic dealer.
7: Playing back or recording do not
function and the screen has frozen.
The LCD Monitor stays dark in
recording still pictures or moving
pictures.
7: Turn the SD Video Camera off. If the
SD Video Camera is not turned off
after pressing the [Í] Button, pull it out
from the USB Cradle and remove the
battery.
8: Sound is not heard while a still
picture is played back.
8: Sound is not presented in the Still
Picture mode (recording or playing
back of still pictures).
9: Images are not displayed on TV,
although the SD Video Camera is
connected to a TV.
9-1: Connect the SD Video Camera to the
TV correctly.
9-2: Use the supplied AV cable.
9-3: When the SD Video Camera is set to
[ ] mode, the video or audio is not
output from the [AV IN/OUT] terminal.
9-4: Video or audio is not output from the
[AV IN/OUT] terminal in which case
[Output select] is set to [LCD].
AV50PP_ENG.book 67 ページ 2003年11月26日 水曜日 午後3時17分