Filter
Top Products
114
LSQT1145
With a computer (VDR-D310/VDR-D230)
≥ If you disconnect the USB cable while the
access lamp is on, it may damage the data.
Using an SD card on a
computer (Macintosh)
¬Connect this unit to the AC adaptor.
1 Insert an SD card with recorded
images in the unit, then turn on
the unit.
2 Connect this unit and a
computer.
A USB cable (supplied)
≥ Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
The USB function selection screen will appear.
3 Select [PC CONNECT(CARD)]
and press the joystick.
icon appears.
≥ When the unit is connected to a computer,
its power cannot be turned off.
In this case, disconnect the USB cable
(l 115).
≥ When a computer is accessing a card in this
unit, the card access lamp lights. ( appears
on the LCD monitor.) Do not disconnect the
USB cable or AC adaptor while the card is
being accessed as it may damage the data.
1 Double-click the [NO_NAME]
icon.
The folders on the SD card are displayed.
2 Select the file in the [100CDPFP]
folder to copy and drag and drop
it to the destination copy folder.
∫ Example folder structure of an SD card:
≥ JPEG format still pictures (IMGA0001.JPG
etc.) are stored in the [100CDPFP] folder.
These can be opened with picture software
that supports JPEG pictures.
≥ Up to 999 files can be recorded in the
[100CDPFP] or other such folder.
≥ The DPOF setting files are recorded in the
[MISC] folder.
≥ Do not use the computer to delete the SD
card’s folders. Otherwise, it may no longer be
possible for this unit to read the SD card.
≥ Always use this unit to format SD cards.
≥ When data not supported by this unit has been
recorded on a computer, it will not be
recognized by this unit.
Connection
A
Copying still picture files to
a computer
DCIM
100CDPFP
MISC
LSQT1145.book 114 ページ ２００６年１２月２８日 木曜日 午前９時３４分