Panasonic VDR-D210 Camcorder User Manual


 
Others
130
LSQT1145
With a computer (Windows)
The indication
disappears.
The screen is frozen.
No operation can be
performed.
Is this unit connected to a computer?
# No operation can be performed on this unit when it is connected
to a computer.
Turn off the power to this unit. If the power cannot be turned
off, press the RESET button, or remove the battery or AC
adaptor and then reattach it. After that, turn on the power
again. If normal operation is still not restored, detach the
power connected, and consult the dealer who you purchased
this unit from.
“PUSH THE RESET
SWITCH.” or “CHECK
THE DISC AFTER
PUSHING THE RESET
SWITCH TO REPAIR THE
DATA.” is displayed.
Is the disc scratched or dirty?
# After using the following method to restart the unit, eject the disc
and clean it. (l 27) If there are scratches on the disc, use a new
disc.
The unit has automatically detected an error. Press the RESET
button with the projecting part of the lens cap A. This will
restart the unit.
If you do not press the RESET button, the power to this unit is
turned off automatically about 1 minute later.
Even after you press the RESET button, the indication may still
appear repeatedly. If so, this unit needs repair. Detach the
power connected, and consult the dealer who you purchased
this unit from. Do not attempt to repair the appliance by
yourself.
If the SD card is inserted
in another device, it is not
recognized.
Check that the device is compatible with the capacity or type of
SD card (SD Memory Card/SDHC Memory Card) that you
inserted.
# Refer to the operating instructions of the device for details.
Problem Check points
Even if connected by the
USB cable, this unit is not
recognized by the
computer.
The USB function selection screen does not appear if the USB
cable is connected while the menu screen is displayed.
# Close the menu screen before connecting the USB cable.
Is the AC adaptor connected?
# Use the AC adaptor when connecting the unit and a computer.
Select another USB terminal on the computer.
Check the operating environment. (l 94)
Turn the unit off then on and disconnect then reconnect the
USB cable.
Problem Check points
A
LSQT1145.book 130 ページ 2006年12月28日 木曜日 午前9時34分