Panasonic VDR-D210 Camcorder User Manual


 
88
LSQT1145
With other products
1 Connect this unit and a video
device.
A AV/S cable (VDR-D310/VDR-D230)
(supplied)
AV cable (VDR-D210) (supplied)
Insert the plugs as far as they will go.
* If the video device has an S Video terminal,
also connect the S Video plug into it. This
allows you to enjoy more beautiful pictures.
(VDR-D310/VDR-D230)
2 Turn on this unit, then rotate the
mode dial to select .
3 Change the input channel on the
video device and TV.
The channel set will differ depending on the
terminal to which the unit is connected.
4 Start playback on this unit.
Then start recording on the
connected device.
See the operating instructions of the video
device for details.
To stop recording (dubbing)
Stop recording on the connected device.
Then stop playback on this unit.
If the date and time display and function
indication are unnecessary, cancel them
before recording (dubbing). (VDR-D310)
(l 42, 86)
With a printer (PictBridge)
(VDR-D310/VDR-D230)
(SD)
To print pictures by directly connecting this unit to
the printer, use a printer compatible with
PictBridge. (Read the operating instructions for
the printer.)
Use the AC adaptor to free you from worrying
about the battery running down.
¬Insert an SD card with recorded
images in the unit, then turn on the
unit.
1 Connect this unit and a printer.
A USB cable (supplied)
Insert the plugs as far as they will go.
Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
The USB function selection screen will appear.
2 Select [PictBridge] and press the
joystick.
The [ ] indication appears on this unit’s
screen.
VIDEO IN
S VIDEO IN
*
AUDIO IN
A
A
LSQT1145.book 88 ページ 2006年12月28日 木曜日 午前9時34分