Filter
Top Products
37
LSQT1319
Recording
(Basic)
2
Recording motion pictures
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (-R]DL)
≥ Open the lens cover before turning the unit on.
1 Rotate the mode dial to select
and open the LCD monitor or
extend the viewfinder.
2 Press the recording start/stop
button to start recording.
To end the recording
Press the recording start/stop button again.
≥ [¥] and [;] are red during recording. Do not
move this unit until [;] is green.
≥ The images recorded between pressing the
recording start/stop button to start recording
and pressing it again to pause recording
become one scene.
≥ When about 5 minutes have passed without
any operation in recording pause, this unit
automatically turns off to save battery life. To
use this unit, turn it on again.
This power save feature can also be set to
[OFF]. (l 31, [POWER SAVE])
∫ Screen indications
A Recording mode
B Remaining time left for recording
When the remaining time is less than
1 minute, [R 0min] flashes red.
C Recording time elapsed
Each time the unit enters the recording
pause mode, the counter display will be reset
to “0h00m00s”.
≥ Maximum number of scenes on one side of a
disc: 999
Maximum number of dates on one side of a
disc: 99
(In some cases, scenes shot on the same day
will be recorded with different dates (l 56))
When either of them reaches to the maximum
limit, more scenes cannot be recorded.
≥ While motion picture recording is in progress,
the recording will not stop even if the LCD
monitor is closed and the viewfinder is
retracted.
0h00m10s
0h00m10s
0h00m10s
SP
R 30min
R 30min
R 30min
A
B
C
VDR-D50P&PC-LSQT1319_eng.book 37 ページ ２００７年１１月１４日 水曜日 午後５時２１分