Panasonic VDR-D50P Camcorder User Manual


 
72
LSQT1319
With other
products
1
Playback on TV
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (-R]DL) (SD)
The motion pictures and still pictures recorded by this unit can be played back on a TV.
Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit and a TV.
2 Turn on this unit, then rotate the
mode dial to select or .
3 Start playback on this unit.
If the image or audio from this unit does
not appear on the TV
Check the connections.
Check that the plugs are inserted as far as they
go.
Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
To watch images with a 16:9
aspect ratio on a regular TV (4:3)
If the images are squeezed horizontally on a TV
with a 4:3 aspect ratio, change the menu setting
to play back the pictures in the original aspect
ratio.
If the images are not displayed correctly on a
wide-screen TV, adjust the aspect setting on
the TV. (Refer to the operating instructions of
the TV for details.)
Select the menu. (l 30)
Example of images with a 16:9 aspect ratio on
a regular TV (4:3)
This function’s default setting is [16:9].
Depending on the TV setting, the pictures may
not be displayed correctly. For more
information, please read the operating
instructions of your TV.
VIDEO IN
AUDIO IN
1
A
2
A AV cable (supplied)
Insert the plugs as far as they will go.
Do not use any other AV cables except
the supplied one.
Select the video input on the TV that
this unit is connected to.
[SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
VDR-D50P&PC-LSQT1319_eng.book 72 ページ 2007年11月14日 水曜日 午後5時21分