Filter
Top Products
99
LSQT1319
Even if a disc or an SD
card is formatted, it
cannot be used.
≥ Either this unit or the disc or SD card may be damaged.
Please contact consumer support. (l 113, 114) Use an SD
card from 8 MB to 8 GB with this unit.
If the SD card is inserted
in another device, it is not
recognized.
≥ Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card)
that you inserted. Refer to the operating instructions of the
device for details.
The indication
disappears.
The screen is frozen.
No operation can be
performed.
≥ No operation can be performed on this unit when it is
connected to a PC.
≥ Turn off the power to this unit. If the power cannot be turned
off, press the RESET button, or remove the battery or AC
adaptor and then reattach it. Turn on the power again. If
normal operation is still not restored, detach the power
connected, and contact consumer support. (l 113, 114)
“PUSH THE RESET
SWITCH.” or “CHECK
THE DISC AFTER
PUSHING THE RESET
SWITCH TO REPAIR THE
DATA.” is displayed.
≥ After using the following method to restart the unit, eject the
disc and clean it. (l 24) If there are scratches on the disc,
use a new disc.
≥ The unit has automatically detected an error. Press the
RESET button with the projecting part of the grip belt A.
This will restart the unit.
≥ If you do not press the RESET button, the power to this unit
is turned off automatically about 1 minute later.
≥ Even after you press the RESET button, the indication may
still appear repeatedly. If so, this unit needs repair. Detach
the power connected, and contact consumer support.
(l 113, 114) Do not attempt to repair the appliance by
yourself.
Problem Check points
A
VDR-D50P&PC-LSQT1319_eng.book 99 ページ ２００７年１１月１４日 水曜日 午後５時２１分