Filter
Top Products
11 Configure the settings relating to images and
audio [Image/Audio]
Note
• SW155, SW152, SW115, SF135, SF132, SP105, and SP102 do not support MPEG-4.
SW314
SW314
SW155
SW155
SW152
SW152
SF135
SF135
SF132
SF132
SP105
SP105
SP102
SP102
SW115
SW115
:
• The “Image” page is displayed instead of the “Image/Audio” page.
The settings relating to JPEG, H.264 and MPEG-4 images such as the settings of image quality, audio, etc.
can be configured on this page.
The “Image/Audio” page has 3 tabs; the [JPEG/H.264] tab (or [JPEG/MPEG-4] tab), the [Image quality] tab
and the [Audio] tab
*1
.
*1
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SP306
SP306
SP305
SP305
SP302
SP302
NP502
NP502
11.1 Configure the settings relating to the picture
(camera) mode [JPEG/H.264] (NP502, NW502S)
Click the [JPEG/H.264] tab on the “Image/Audio” page. (®page 42, page 44)
[Picture (Camera) mode]
Select the picture (camera) mode from the combinations of the maximum number of pixels and the aspect
ratios below.
1.3 mega pixel (VGA) [4:3]
1.3 mega pixel (800x600) [4:3]
1.3 mega pixel [16:9]
3 mega pixel [4:3]
3 mega pixel [16:9]
• Default: 1.3 mega pixel (VGA) [4:3]
Note
• When this setting is changed, the camera will reboot automatically.
• Aspect ratio of “16:9”, or “1.3 mega pixel (800x600) [4:3]” is unavailable for the MPEG-4 images.
• When selecting “1.3 mega pixel (800x600) [4:3]”, “1.3 mega pixel [16:9]”, or “3 mega pixel [16:9]” for
“Picture (Camera) mode”, “H.264” is automatically set for “Video encoding format”.
• Check the following before changing the picture (camera) mode setting from a 1.3 mega pixel setting
to a 3 mega pixel setting.
– “QVGA” is not selected for “Image capture size” of “JPEG”.
– “QVGA” is not selected for “Image capture size” of “SD memory card”. (®page 57)
– “QVGA” is not selected for “Image capture size” of “Alarm image”. (®page 138)
– “QVGA” is not selected for “Image capture size” of “FTP periodic image transmission”.
(®page 192)
Operating Instructions 75
11 Configure the settings relating to images and audio [Image/Audio]