ParkerVision 1-CCD Digital Camera User Manual


 
Appendices
CameraMan
1-CCD Camera System Installation and Operations Manual 3-3
B: Camera Specifications
This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause
harmful interference. FCC identifier: JFECM003-AA
1-CCD General Pan/Tilt Camera
Image Sensor................................ 1/3" IT CCD
Picture Elements............................ NTSC: 768 (H) x 494 (V)
PAL: 752 (H) x 582 (V)
Angle of View............................... Hor: 48.8° to 4.3°
Vert: 37.6° to 3.3°
Lens Converter Options.................Wide Angle (.65x)
Shortest Subject Dist .....................10 mm (wide) to 800 mm (tele)
Hor. Resolution .............................NTSC: 460+ TV lines
PAL: 450+ TV lines
Vert. Resolution.............................NTSC: 350+ TV lines
PAL: 400+ TV lines
Min. Illumination...........................7 lux F1.8: More than 50 IRE
S/N Ratio ......................................More than 48 dB
White Balance...............................Auto/TTL Auto Tracing/Preset
Electronic Shutter..........................NTSC: 27 steps (1/60 to 1/10000
sec)
PAL: 28 steps 1/50 to 1/10000 sec)
Flickerless...................................... Automatic
Focus Control................................ Automatic or Manual
Image Control.............................Automatic or Manual
Mechanical Devices.....................WhisperDRIVE Plus
TM
rated for 5000
hrs of continuous motion
Tilt ..............................................±25° (speed: 1°/sec to 50°/sec)
Pan .............................................359° (speed: 1°/sec to 65°/sec)
Location Presets..........................125 via software or CCK
Location Preset Accuracy...............± .125°
Temperature...............................32° to 100°F (0° to 37.78°C)
Video Out (75 ohm)....................Composite or S-VIDEO
NTSC
VBS: 1.0 Vp-p Composite
Y: 1.0 Vp-p Sync Negative
C: Burst 0.286 Vp-p
PAL
VBS: 1.0 Vp-p Composite
Y: 1.0 Vp-p Sync Negative
C: Burst 0.300 Vp-p
RS-232 Port.................................DB-9 female connector
RS-485 Port.................................Bus up to 16 cameras
(4 Pos. RJ handset port)
Power.........................................US: 120V, 60Hz AC
INT: 100-240VAC, 50-60Hz
100W maximum consumption
Genlock ......................................VBS Genlock
Phase Control..............................H/SC Phase control
Humidity.....................................0 to 95% non-condensing
Dimensions.................................US: 9.25"L x 12.75"W x 10.75"H
INT: 23.5cmL x 32.38cmW x 27.31cmH
Weight........................................14 lbs. (6.35 Kg)
CameraMan
Clearance
The minimum dimension for the CameraMan
is a circular diameter
of 22". This accounts for both camera and cable clearance.
Refer to the "Mounting Your CameraMan
Camera"
topic of section 2, Installation and Startup.