Filter
Top Products
34 C3463M (10/09)
PRESETS
The model of the back box you are using limits the number of configurable presets that can be stored and retrieved in the back box memory. If you
are using an older model back box, you may configure and use up to the maximum number of presets available to the dome drive. However, if the
dome drive is changed, the back box model will limit the number of stored presets available to the new dome drive (refer to Table C).
The Spectra IV SL dome system, which includes 23X models, has 64 preset positions. The presets that can be configured are numbered 1 to 32
and 35 to 64.
The Spectra IV SE dome system, which includes 27X and 35X models, has 256 preset positions. The presets that can be configured are numbered
1 to 32, 35 to 82, and 100 to 256.
Note: The number of available presets may be limited by the head-ins, controllers, and DVRs that are connected to your dome system.
Each of the user-definable presets can be configured to use pan, tilt, camera settings, and motion detection.
The following presets are predefined for specific functions:
Preset 33: Flip command; pans the dome drive 180 degrees
Preset 34: Pan zero command; directs the dome drive to the factory-determined zero reference point
Preset 83 to 87: Reserved
Preset 88: IR filter IN (color)
Preset 89: IR filter OUT (black-white)
Preset 90 to 91: Manual limit stops
Preset 92 to 93: Scan limit stops
Preset 94: Reserved
Preset 95: Select main configuration menu
Preset 96: Stop a scan
Preset 97: Random scanning
Preset 98: Frame scanning
Preset 99: Start auto scanning
Table C. Stored Presets by Back Box Model
Back Box Series Model Number of Stored Presets
Spectra/Spectra SL Spectra SE
Spectra III BB53 99 15
Spectra IV BB4 64 256
EXIT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
DOME SETTINGS
PRESET NUMBER 1
* * * PRESET NOT DEFINED * * *
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>
<EDIT SCHEDULE>
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
BACK
EXIT
REFERENCE INFORMATION
AZIMUTH -
ELEVATION -
ZOOM RATIO -
CUSTOM CAMERA SETTINGS -
PRESETS
*This setting applies only to Pressurized Spectra IV dome systems.