Filter
Top Products
116
3
Taking Pictures
In
C
(Movie)/
(
Underwater Movie) modes, you can compensate for camera
shake while you are recording a movie with the Movie SR (Movie Shake Reduction)
function.
1
Use the four-way controller (23) to select [Movie SR] on the
[C Movie] menu.
Pressing the 3 button in C (Movie) or (Underwater Movie) modes
display the [C Movie] menu.
2
Use the four-way controller (45)
to select O (On) or P (Off).
O(On) Automatically corrects for
camera shake.
P (Off) No correction for camera
shake.
The setting is saved.
In this mode, you can record multiple still pictures taken automatically at a set
interval from a set time, as a movie file.
Setting the Movie SR (Movie Shake Reduction)
Function
Recording a Movie from Pictures Taken at a Set
Interval (Interval Movie)
Interval You can set this to 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Total Time
Set the total time, from 10 minutes to 359 hours. The total time and the
settable units change depending on the interval set. The Interval can be set
in increments of 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Start Delay
Set the start delay, from 0 minutes to 24 hours. You can set 1 minute
increments for the first 59 minutes and 1 hour increments from there. If
the start time is set to 0 minutes, the first picture is taken as soon as the
shutter release button is pressed.
MENU
Recorded Pixels
Mov
iSRe
Exit
Movie