Pentax 15441 Digital Camera User Manual


 
84
3
Taking Pictures
4
Point the remote control at the remote control receiver and
press the shutter release button on the remote control.
The focus frame turns green when the subject is in focus and the camera takes
a picture at the following timing.
When i is selected:
The self-timer lamp and the LED Macro Lights blink quickly and the
camera takes a picture after about three seconds.
When h is selected:
The camera takes a picture immediately.
Press the shutter release button once to automatically adjust the exposure and
take three pictures in succession. After taking the pictures, you can select the best
one.
The shooting order is best exposure
–1.0 EV
+1.0 EV.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select a (Auto
Bracketing) and press the 4 button.
The camera is now ready to take pictures with Auto Bracketing.
The shooting with remote control is available from the front of the camera
and the back of the camera.
The operating range is approx. 4 m from the front of the camera and 2 m
from the back of it.
•In C (Movie), (Underwater Movie) and (High Speed Movie) modes,
pressing the shutter release button again stops the recording.
The camera takes a picture even if the focus is not achieved.
If the shutter release button on the camera is pressed halfway during the
countdown, the countdown stops. If the shutter release button on the
remote control is pressed again, the camera starts the countdown again.
i/h cannot be selected in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
The self-timer lamp does not turn on or blink in e (Pet) mode.
Taking Pictures with Automatic Exposure
Adjustment (Auto Bracketing)
When the Instant Review is set to O (On) (p.104), the pictures taken are
shown in Instant Review after shooting (p.63).
a cannot be selected in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.