83
3
Taking Pictures
You can use the remote control (optional) to take pictures while you are away
from the camera.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select i and press the
four-way controller (3).
3
Use the four-way controller (45)
to select i or h and press the
4 button.
The self-timer lamp begins to blink slowly
and the camera is ready to take a picture
with the remote control.
When the camera detects a person’s face,
the Face Detection function is activated
and the face detection frame appears (p.69).
•With j, you can continue shooting until the memory capacity of the SD
Memory Card or built-in memory is full.
• The interval of j varies according to the [Recorded Pixels] and [Quality
Level] settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Detection function is activated (p.69), it works only when
taking the first shot.
• The Blink Detection function works only for the last shot.
• The number of recorded pixels is fixed at f/ in c mode. When the
shooting mode is set to (Report), the number of recorded pixels is set
to V.
Taking Pictures Using the Remote Control Unit
(Optional)
i
The shutter will be released after about three seconds when the shutter release
button on the remote control unit is pressed.
h
The shutter will be released immediately when the shutter release button on
the remote control unit is pressed.
MENU
MENU
OK
OK
MENU OK
Drive Mode
Drive Mode
Remote Control
Remote Control
Drive Mode
Remote Control
Cancel
Cancel
OK
OK
Cancel OK