Filter
Top Products
141
4
Playing Back and Deleting Images
1
Turn the AV device and camera off.
2
Open the terminal cover.
Move the terminal cover lock lever in the direction shown by 1, slide the cover
in the direction shown by 2 and open the cover in the direction shown by 3.
3
Connect the AV cable to the PC/AV terminal.
4
Connect the other ends of the AV cable (yellow: video, white:
audio) to the video input terminal and audio input terminal of
the AV device.
When using stereo sound device, insert the sound terminal into the L (white)
terminal.
5
Turn the AV device on.
When the device that the camera is connected to and the device that plays back
images are different, turn both devices on.
When viewing images on AV device with multiple video input terminals (such as
a TV), refer to the operating manual of the device and select the video input
terminal to which to connect the camera.
6
Turn the camera on.
• Depending on the country or region, images and sound files may fail to be
played back if the video output format is set different from the one in use
there. If this happens, change the video output format setting (p.187).
• The camera’s AV output is output at normal resolution.
To watch movies shot at , or M at HDTV resolution, output the
movies as HDMI or transfer them to a computer (p.142).
Close the terminal cover securely when not using the terminal.
<How to close the terminal cover>
Close the cover in the opposite direction indicated by 3. While lightly
pressing on the terminal cover, slide it away from 2 until it clicks.