Filter
Top Products
116
Shooting Functions
4
3
Use the four-way controller
(45) to select g.
4
Press the four-way controller (3) and use the four-way
controller (45) to select g or h.
5
Press the 4 button.
The camera is ready to take pictures continuously.
6
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the
viewfinder when focused.
7
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully
pressed. Take your finger off the shutter release button to stop.
• If the AF mode is set to l (Single mode), the focus position is locked on
the first frame and pictures are taken continuously at the same interval.
• Focusing is continuously active when the AF Mode is set to k
(Continuous mode), when Picture mode is set to \ (Moving Object) or H
mode is set to C (Kids) or E (Pet). Note that the shutter will be released
even if the focusing is not complete.
• The shutter cannot be released until charging is complete when using the
built-in flash. You can set the camera to enable shutter release before the
built-in flash is ready in [15. Release when Charging] in the [A Custom
Setting] menu. (p.129)
• Select a setting other than g or h in the [Drive Mode] screen to cancel
continuous shooting. The setting is canceled when the camera is turned off if
[Drive Mode] in [Memory] (p.217) of the [A Rec. Mode] menu is set to P
(Off).
Drive Mode
Drive Mode
Continuous shooting (Hi)
Continuous shooting (Hi)
Drive Mode
Continuous shooting (Hi)
OK
OK
OK
OK