Filter
Top Products
244
Appendix
12
The subject is
not in focus
The AF mode is set
to k
(Continuous mode)
Autofocus is not locked (focus lock) when
the AF mode is set to k. The camera will
continue focusing on the subject while the
shutter release button is pressed halfway. If
there is a subject that you wish to focus on,
set the AF mode to l (Single mode) and
use the focus lock.
The Capture mode
is set to \
(Moving Object),
C (Kids) or E
(Pet) in H mode
Set the Capture mode to setting other than
\ (Moving Object), C (Kids) or E (Pet) in
H mode. (p.78)
The AE lock
function does
not operate
The exposure
mode is set to a
(Manual) mode or
p (Bulb) mode
Use AE lock with any setting other than a
(Manual) mode or p (Bulb) mode.
The flash
does not
discharge
When the flash
mode is set to [Auto
discharge] or [Auto
flash+Redeye
reduct], the flash
will not discharge if
the subject is bright
Set the flash mode to [Flash On] or [Flash
On+Red-eye]. (p.62)
Mode dial is set to
a (Flash OFF)
Set mode dial to any setting other than
a (Flash OFF). (p.78)
H (Scene) mode
is set to A (Night
Scene),
K (Sunset),
D (Candlelight) or
E (Museum)
Set H (Scene) mode to any setting other
than A (Night Scene), K (Sunset),
D (Candlelight) or E (Museum). (p.79)
The power
zoom system
does not
function
The camera does
not have the power
zoom function
Use manual zoom. (p.61)
The USB
connection
with a
computer
does not work
properly
The Transfer Mode
is set to
[PictBridge]
Set [USB Connection] in the [R Set-up]
menu to [PC].
Refer to p.11 of the “PENTAX PHOTO
Browser 3/PENTAX PHOTO Laboratory 3
Operating Manual” for details on connecting
the camera to a PC.
The USB
connection
with a printer
does not work
properly
The Transfer Mode
is set to [PC]
Set [USB Connection] in the [R Set-up]
menu to [PictBridge]. (p.194)
Problem Cause Remedy