Filter
Top Products
58
Basic Operations
3
3
Look through the viewfinder to
view the subject.
A zoom lens can be used to change the
size of the subject in the viewfinder.
1Using a Zoom Lens (p.61)
4
Position the subject inside the
AF frame and press the shutter
release button halfway.
The autofocus system operates. The focus
indicator
]
appears in the viewfinder
when the subject comes into focus.
When set to I (Auto Picture) mode,
the optimal capture mode is automatically
selected from Portrait, Landscape,
Macro, and Moving Object modes or
standard settings (Normal mode).
The flash pops up automatically when
necessary. (Push the K button and
manually lift the flash when Flash mode is
not set to [Auto discharge] or [Auto
flash+Redeye reduct]).
1
Operating the shutter release button
(p.59)
1
Subjects that are Difficult to Focus on
(p.60)
1
Using the Built-in Flash (p.62)
1
Selecting the Focusing Area (AF Point) (p.105)
5
Press the shutter release
button fully.
The picture is taken.
You can preview the image in the monitor and check the composition,
exposure, and focus before taking the picture. (p.112)
Focus indicator
Flash
status