101
Shooting Functions
4
Set Exposure Steps in [
2. EV Steps
] in the [A Custom Setting] menu to
increments of 1/2 EV or 1/3 EV.
EV compensation is not available when the exposure mode is set to B
(Green) or p (Bulb) mode.
• The EV compensation cannot be canceled by turning the camera off or by
setting any other exposure mode.
• The EV compensation value is reset to 0 when the Green button is pressed
while holding down the m button.
Changing the Exposure Steps
EV Compensation for a (Hyper-manual) and M
(Flash X-sync speed)
For example, if the EV compensation value is set to +1.5 for a and
M, an underexposure of 1.5EV is displayed on the EV bar. If you set
the exposure value so that the V is displayed at the center of the EV
bar, the image will be captured with the compensated value.
2.
EV Steps
Exposure setting steps
are set to 1/2 EV
1/2 EV Steps
1/3 EV Steps