Pentax K20D Camcorder User Manual


 
253
Appendix
12
1
Select [Dust Alert] in the [R Set-
up] menu.
2
Press the four-way controller (5).
3
Point the lens at a white wall or
other uniform surface and press
the shutter release button fully.
After image processing is performed, the
Dust Alert screen appears.
4
Press the 4 button.
The image is saved and Dust Alert is exited.
The exposure time may be extremely long when using the Dust Alert
function. Note that if the direction of the lens is changed before processing is
complete, dust will not be detected properly.
The Dust Alert image can only be displayed during sensor cleaning within 30
minutes from the time the image is saved. If 30 minutes elapse, save a new
Dust Alert image and then perform sensor cleaning.
The saved Dust Alert image cannot be displayed in Playback mode.
Dust Alert image cannot be saved when an SD Memory Card is not inserted.
If [NG] is displayed in Step 3 and the camera is unable to detect dust, press
the 4 button and take another picture.
Regardless of the camera settings, a picture will be taken with specific
shooting conditions in Step 3.
When using a lens with an aperture ring, make sure the aperture ring is set
to the s position.
•Press the M button or turn the rear e-dial when displaying the Dust Alert
image to view it at full screen display.
1
min
IMGP
Date
Folder Name
Auto Power Off
File Name
Select battery
Pixel Mapping
Dust Alert
MENU
3/4
Set-up
Cancel
Exit
Exit
Exit
OK
x1
x1
x1