Filter
Top Products
85
Shooting Functions
4
You can set the sensitivity to suit the brightness of the subject.
The shutter speed and aperture are automatically set according to the
selected sensitivity to obtain the appropriate exposure.
1
Set the mode dial to K.
Using the K (Sensitivity Priority) Mode
Hyper-program
To change the shutter speed
You can switch to Shutter Priority automatic exposure by turning the
front e-dial in e (Hyper-program) mode.
•
You can only set the shutter speed to a value that will give a correct
exposure with the aperture range of the lens being used.
• If the brightness changes and the aperture value is outside the
relative range, the aperture value will blink in the viewfinder and on
the LCD panel.
•
Press the Green button to return to Hyper-program automatic
exposure.
To change the aperture
You can switch to Aperture Priority automatic exposure by turning the
rear e-dial in e (Hyper-program) mode.
•
You can only set the aperture to a value that will give a correct
exposure within the range of available shutter speeds.
•
If the brightness changes and the shutter speed is outside the relative
range, the shutter speed will blink in the viewfinder and on the LCD
panel.
•
Press the Green button to return to Hyper-program automatic
exposure.