Filter
Top Products
234
Camera Settings
10
You can set the battery priority to the camera or the battery grip when a
battery grip (p.256) is attached. The default setting is [Auto Select].
1
Select [Select battery] in the [R Set-up] menu.
2
Press the four-way controller
(5).
The screen for selecting the battery
appears.
3
Press the four-way controller
(5).
Use the four-way controller (23) to
select from [Auto Select], [Body First] and
[Grip First].
4
Press the 4 button.
5
Press the 3 button twice.
The camera is ready to take a picture.
Selecting a Battery
Auto Select
Priority is given to the battery with the most remaining power.
Body First/Grip First
Priority is given to the selected battery.
• If the battery is inserted into both the body and grip, the battery levels of both
are checked when the power is turned on. Regardless of the [Select Battery]
setting, both batteries are slightly used.
• When the currently selected battery runs out as a result of the check, [Battery
depleted] appears on the monitor. Turn the camera off and on again, and the
camera will switch to the remaining battery.
• You can check the battery usage condition on the detailed information
display in Capture mode. (p.24)
Select battery
Auto Select
MENU
Body First
Grip First
MENU
Select battery
Auto Select
OK
OK
Cancel