Pentax K20D Camcorder User Manual


 
119
Shooting Functions
4
You can take pictures continuously at approximately 21 frames per second.
In this mode, images are saved with JPEG Quality set to Y (1536×1024)
regardless of the save format setting (p.156). The JPEG Quality set in the
[A Rec. Mode] menu is used.
1
Press the { button.
The Fn menu appears.
2
Press the four-way controller (2)
and use the four-way controller
(45) to select j.
3
Press the 4 button.
The camera is ready to take pictures continuously.
4
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the
viewfinder when focused.
5
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully
pressed until the camera buffer memory is full (JPEG Quality C:
maximum of approximately 115 pictures). The focus is locked during
shooting.
Burst Shooting
The mirror raises during shooting and Instant Review is displayed
continuously on the monitor.
The flash is turned off and the
|
button operation is unavailable in this mode.
Multi-exposure and Auto Bracket are disabled in this mode.
Select a setting other than j in the Drive Mode options screen to cancel
burst shooting. The setting is canceled when the camera is turned off if [Drive
Mode] in [Memory] of [A Rec. Mode] menu (p.236) is set to P (Off).
Drive Mode
Drive Mode
Burst Shooting
Burst Shooting
Drive Mode
Burst Shooting
OK
OK
OK
OK