Pentax K20D Camcorder User Manual


 
164
Shooting Settings
6
6
Press the shutter release button
fully.
Slide the focus mode lever to \ when
the shutter cannot be released.
The screen to select the measuring range
is displayed.
7
Use the rear e-dial to select the entire screen or spot area
for the measuring range.
8
When a spot area is selected, use the four-way controller
(2345) to move the frame to the area you want to
measure.
9
Press the 4 button.
The White Balance fine-tuning screen
appears when measuring is completed.
Tune using steps in “Fine-Tuning the
White Balance” if fine-tuning is
necessary. (p.162)
10
Press the 4 button.
The camera returns to the White Balance screen.
11
Press the 4 button.
The camera is ready to take a picture with the set White Balance.
No image is recorded when the shutter release button is pressed to adjust
the white balance. Press the { button to save the background image as a
JPEG image. The image save confirmation screen appears. Select [Save as]
and press the 4 button.
[NG] appears when measuring is unsuccessful. Press the 4 button while
displayed to return to the White Balance fine tune screen for remeasuring.
If the picture is extremely overexposed or underexposed, white balance may
not be adjusted. In this case, adjust appropriate exposure and adjust the
white balance.
OK
OK
OK
OK
±0±0±0±0
±0±0
MENU
GG
BBA
A
A
MM
SHUTTER
OK
OK
OK
OK
Cancel
Cancel
Cancel
Manual
Manual
White Balance
White Balance
Manual
White Balance