Pentax Optio MX4 Digital Camera User Manual


 
130
9
Settings
Choose the appropriate USB connection mode depending on whether
you are going to connect the USB cable to a printer or a computer.
1 Select [USB Connection] on the [B Set-up] menu.
2
Use the four-way controller (
45
)
to select [PC], [PictBridge] or
[PC-F].
[PictBridge]: Select this option when
connecting the camera directly
to a PictBridge-compatible
printer.
[PC] : Select this option when
connecting the camera to a computer.
[PC-F] : Select this option if data transfer does not work properly
when [PC] has been selected.
3 Press the OK button.
The camera is ready to be connected to the computer or printer.
Changing the USB Connection Mode
Do not connect the camera to your PC while [PictBridge] is
selected for the USB Connection mode.
Do not connect the camera to the printer while [PC] or [PC-F] is
selected for the USB Connection mode.
Refer to the “PC Connection Manual - Enjoying Your Digital
Camera Images On Your PC” for instructions on connecting the
camera to a computer.
Depending on the connecting condition of PC and the camera,
images or other data may not be transferred properly. If this
happens, select [PC-F]. (Data transfer is fixed at USB full speed
when [PC-F] has been selected.)
Rec. Mode
MENU
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
AWB
2304
AUTO
Exit
OK
OK
MENU
How to recall the [B Set-up] menu
MENU button
Four-way controller
OK button
MENU
PCPC
NTSCNTSC
Set-up
Screen Setting
Brightness Level
Video Out
USB Connection
Sleep Timeout
Auto Power Off
1min1min
3
min
3
min
Exit
OK
OK