Filter
Top Products
13
1
Getting Started
Getting Started
Attaching the Strap
Attach the cap holder to the lens cap and thread the cord onto the
camera strap. Remove the lens cap by pressing the tabs on either side
of the cap.
1 Attach the strap to the camera.
Pass the narrow end of the strap through
the strap lug and pass the other end through
the loop. Do not tighten the strap until the
cap holder has been attached.
2 Attach the cap holder to the lens
cap.
Pass the short end of the cap holder
through the hole in the lens cap.
3 Attach the cap holder to the
camera strap as shown.
Pass the lens cap through the loop and
tighten the cap holder and camera strap.
Cap holder