Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 47
Item Description
(1) Go to Top Page Links to Top Page. You can access Single/Multi-
Camera screen in Motion JPEG/JPEG - Regularly
Refresh. Refer to page 49.
(2) Network Configures the network setting (Static/DHCP,
Default Gateway, Port Number, DNS, DDNS and
Bandwidth). Refer to page 50.
(3) Name/Time Sets the Camera Name on the Single Camera
screen. Date and Time is used in the Alarm/Timer
mode in the Image Transfer feature and On the Air
time setting on Top View Image Setting window.
NTP automatically adjusts the internal clock of
Network Camera. Refer to page 54.
(4) Security:
Administrator
Sets administrator ID and password. Authentication
window can be enabled. Administrator should
control Network Camera. Refer to page 56.
(5) Security:
General User
Sets general user ID and password. General user is
the registered user. Refer to page 58.
(6) Top View Image Sets the initial language, Title, Image URL, Link
URL, the image resolution, image quality, refresh
interval and the Limit time of Continuous Motion and
On the Air time. Top View Image screen consists of
Single Camera and Multi-Camera screen. Refer to
page 60.
(7) Image Transfer Enables the Alarm/Timer mode in the Image
Transfer feature. Network Camera can transfer the
image via e-mail or FTP. The alarm/timer trigger can
be set on Image Transfer window. Refer to page 62.
(8) Camera Setup Sets White Balance and Power Line Frequency. You
can lock the Brightness. Refer to page 74.
(9) Multi-Camera The Multi-Camera screen needs to set up these
parameters. Enter the Camera Names and IP
addresses of each Network Camera. The Multi-
Camera can display up to four images in a window.
Refer to page 76.