Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 63
Non Transfer mode
Non Transfer mode enables [Start Capture] on the operation bar to buffer the
image on the Single Camera screen. Refer to page 42. Capture Control can lock
[Start Capture] on the operation bar to prevent the user from capturing the
Buffered Image. Click [Clear Buffered images] to clear the buffered image.
[Clear Buffered images] does not save the parameters.
1.
Click [Image Transfer] on Setup Page.
2.
Select the each parameter. Click [Save] when finished.
• Click [Cancel] to quit the current settings. The window returns to Setup
Page without saving the parameters.