Filter
Top Products
Orion/2 Outdoor
9
2.2 Switch Definition
First of all, configuring the dome ID and communication protocol is required before
connecting the dome camera to other devices. The switches used for configuring
these settings are located on the bottom of the dome camera.
Outdoor Dome
A
Reserved
B
Communication Switch
C
Dome ID Switch
D
Dome Control Protocol Switch
E
RJ-45 Connector (Reserved)
F
22-Pin Connector
2.3 Communication Switch Setting
The table below shows the function of each pin within the Communication Switch.
Communication Switch Pin 1
Pin 2
RS-485 Setting
Pin 3
Termination
Pin 4
Line Lock
Pin 5
System Initialization (for upgrade)
Pin 6
Reserved