Philips Orion/2 Security Camera User Manual


 
Orion/2 Outdoor
42
SHADE
The color of privacy mask can be selected through this item. The available colors
are black, gray and white.
SET MASK
After pressing <ENTER> on this item, dome will memorize this position as
privacy mask position, up to 8 masks can be set. The model restricts the mask
zones to be set too close with each other.
H CENTER (000~256)
The original center of mask zone is the center of screen. User can move the
center of mask zone to another position through adjust this value by pressing the
LEFT/RIGHT keys.
V CENTER (000~256)
The original center of mask zone is the center of screen. User can move the
center of mask zone to another position through adjust this value by pressing the
LEFT/RIGHT keys.
H SIZE (000~127)
User can adjust the horizontal size of privacy mask through this item. Set the H
and V size to 0 can also delete the selected mask.
V SIZE (000~127)
User can adjust the vertical size of privacy mask through this item. Set the H and
V size to 0 can also delete the selected mask.
MASK CLEAR+RESET
The item is used to clear the mask settings of the selected privacy mask. Use
LEFT/RIGHT direction keys to select a mask and press <ENTER> to erase its
configuration.
MASK DISPLAY
This item is used to set the occasion to display privacy mask.
FIRST
If select this mode, the camera will detect the mask zone of the next preset
position and display the mask in advance, then pan the dome to the preset point.
MASK01 MENU
H CENTER 000
V CENTER 000
H SIZE 000
V SIZE 000
EXIT
+
SAVE
YES