Filter
Top Products
Orion/2 Outdoor
35
• DWELL TIME
The DWELL TIME is the duration time that the dome will stay at the sequence
point, and the range is from <0> to <127> seconds. The dome will go to the next
sequence point when the DEWEL TIME is up. If the setting is <0>, the dome will
stay at this sequence point until users manually move the dome.
• RUN SEQUENCE
User can command the dome camera to run the selected Sequence line
manually.
• EXIT
Select the item to exit the SEQUENCE menu.
3.3.15 AUTOPAN
Auto-pan means rotating or scanning side-to-side motion by a dome camera to view
an area horizontally. The parameters can be set on this page.
• AUTOPAN LINE
There are four sets of auto-pan lines built in dome camera. Users can choose a
line to execute using LEFT/RIGHT direction keys. Users are able to command
the dome camera to do continuously panning without limit by setting the start
point the same as endpoint.
• START POINT
Follow the description to set the start position of the AUTOPAN path.
1. Move the cursor to <START POINT> and press <ENTER> while <TO FIND>
item flashes, the item will turn <TO SAVE> automatically.
2. Move the dome to a desired position and press <ENTER> to save the
position as the start point; the cursor will move to <END POINT>
automatically. Ensure to set the end point to complete the auto-pan setting.
NOTE: The tilt and zoom value of the start point will be recorded and
fixed for the selected auto-pan line.
AUTOPAN
AUTOPAN LINE 1
START POINT TO FIND
END POINT TO FIND
DIRECTION RIGHT
SPEED 1
RUN AUTOPAN ENTER
EXIT YES