Filter
Top Products
Orion/2 Outdoor
31
• ALARM PIN
The dome provides 8 alarm inputs and 2 outputs (1× N.O. and 1× N.C.). Select
an alarm connector which you want to set its alarm-related parameters with this
item, and then set its alarm-related parameters in Alarm Setting menu. For alarm
pin definitions, please refer to section 2.6 Alarm Pin Definition
or installation
guide.
• ALARM SWITCH
The item is used to enable or disable the selected alarm pin function. Use the
left/right direction keys on the control keyboard to change the setting.
• ALARM TYPE
There are two kinds of alarm types: Normal Open and Normal Close, which are
illustrated as below. Select an alarm type that corresponds with the alarm
application.
• ALARM ACTION
Select one of these modes that choose a kind of actions that should be executed
when an alarm is triggered. The alarm actions can be set to execute the preset
position, sequence, auto-pan or cruise function. Use the right direction key of the
control keyboard to change the setting, and the bellowing items will change in
cooperating with your selection.
• PRESET
Select a preset point where the dome should go when an alarm pin is triggered.
The Preset points can be set by a control keyboard.
ALARM SETTING
ALARM PIN 1
ALARM SWITCH OFF
ALARM TYPE N.C.
ALARM ACTION PRESE
T
PRESET POINT 001
DWELL TIME ALWAY
EXIT YES