Filter
Top Products
Orion/2 Outdoor
36
• END POINT
Users are able to set the end point after the start point is defined. Pan the dome
to another position and press <ENTER> to save the position as the end point.
• DIRECTION
The item is for setting the AUTOPAN direction of dome camera. The dome will
start to pan clockwise from the start point to the end point if your selection is
<RIGHT>, and then return to the start point. The dome will start to pan
anti-clockwise from the start point to the end point if your selection is <LEFT>.
Refer to below diagram.
• SPEED
The item is for defining the dome camera rotation speed while running auto-pan.
The speed is adjustable from 1 to 4; refer to the table below for details.
PAN (degree/sec.)
Speed 1
10
Speed 2
23
Speed 3
35
Speed 4
45
• RUN AUTOPAN
After the setting is completed, select this item to manually execute the Auto-pan
function.
• EXIT
Exit the AUTOPAN setup menu.
3.3.16 CRUISE
A Cruise is a route of manual operations that can be stored and recalled to execute
repeatedly. It can be formed of pan, tilt position and zoom parameters (the zoom
setting only with 26x model).