Filter
Top Products
Orion/2 Outdoor
32
SEQUENCE
Select a sequence line that the dome camera should execute when alarm pin is
triggered. The Sequence line should be defined prior in SEQUENCE setup
menu.
AUTOPAN
Select an auto-pan line that the dome camera should execute when alarm pin is
triggered. The Auto-pan line can be defined in setup AUTOPAN menu.
CRUISE
Select a cruise line that the dome camera should execute when alarm pin is
triggered. The Cruise line can be defined in CRUISE setup menu.
• DWELL TIME
The DWELL TIME is the duration of executing ALARM ACTION: Preset or
Sequence. When alarm takes place, the dome will go to the preset position or
execute sequence function and stay at each sequence point for a period of time
(1~127 seconds). If select <Always>, the dome will go to the preset position and
stay there until alarm condition is released or users rotate the dome.
NOTE: The DWELL TIME is only accessible when selecting ALARM
ACTION: Preset or Sequence.
• EXIT
Exit the ALARM SETTING menu.
3.3.13 HOME SETTING
Users are able to set an operation mode to ensure constant monitoring; if the dome
idles for a period of time, the pre-set function will be activated automatically, this is
the HOME function. HOME function allows constant and accurate monitoring, to
avoid the dome stops or missing events.
• HOME FUNCTION
The item is used to enable or disable the HOME function. Use the left/right
direction keys of the control keyboard to change the setting.
HOME SETTING
HOME FUNCTION OFF
SELECT MODE PRESE
T
PRESET POINT 001
RETURN TIME 001
GO ENTER
EXIT YES