Filter
Top Products
Figure 1-3: Rear panel of ICA-110W
1. External Antenna
The rotatable external antenna allows you to adjust its position to
obtain the maximum signal.
2. Network Cable Connector
The ICA-110/ICA-110W’s rear panel features an RJ-45 connector
for connections to 10Base-T Ethernet cabling or 100Base-TX
Fast Ethernet cabling (which should be Category 5 twisted-pair
cable). The port supports the N-Way protocol and “Auto-MDIX”
function, allowing the ICA-110/ICA-110W to automatically
detect or negotiate the transmission speed of the network.
3. Reset Button
Reset will be initiated when the reset button is pressed once, and
Power LED begins to flash.
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds or when Power LED begins to
14