Filter
Top Products
47
Factory Reset
Do you really want to factory reset this device? Click YES from
this option, and you can resume all factory default settings for the
camera.
NOTE: You have to configure the network settings again after a
Factory Reset.
LED Control
The LED control allows user to setup the LED illumination as
desired. This feature provides the flexibility when surveillance
activity is ON. There are three options: Normal, ON, and OFF.
Normal
Power - Steady On of the LED indicator.
Link - Steady On of the LED indicator.
When LAN activity is present the LED
indicator will flash steadily.
OFF
Power - LED indicator is off.
Link – LED indicator is off.
Dummy
Power - Steady On of the LED indicator.
Link - Steady On of the LED indicator with
random flashing.
Note: This function is built-in to the LED indicators to
add extra capabilities. The three options allow the
Administrator to configure and camouflage the
illumination for the LED indicator to falsify the
monitoring status. In Normal Mode the LED indicator
functions as normally. Under Off Mode the LED
indicators are both off however, it is still monitoring the
activity. In Dummy Mode the LED indicators operate in
monitoring condition but monitoring activity is off or on.